Regional General Mechanic
This position is not in the Classified Service of New York State, but is covered under New York State Military Law. If selected, current Civil Service employees will lose their seniority within the Classified Service, thereby exempting them from applying for promotional exams within Civil Service. The Regional General Mechanic (Regional GM) is assigned to a district or geographic region and covers various facilities within the assigned area. The Regional GM is expected to have advanced knowledge and skills in a wide array of facilities operations and building and mechanical trades. Building trades include such specialties as carpentry, roofing, and locksmith skills; while the mechanical trades include such specialties as the maintenance and repair of plumbing, electrical, heating, ventilation, air conditioning and refrigeration systems. The Regional GM functions as the lead general mechanic for the region for which assigned and must have the ability to perform tasks with minimal supervision. Incumbents of this position are considered essential personnel. The incumbent is responsible for keeping the buildings and grounds functional and ready for use at all times. The tasks of the position are those concerned with the maintenance of various components of the buildings themselves. These encompass a broad range of duties to meet the standards of daily, weekly, monthly and yearly inspections. The incumbent will be required to respond to emergencies that may occur at any time of the day. The position performs responsibilities in accordance with DMNA and labor agreement policies and procedures, and where applicable, requirements and standards of the National Guard Bureau (NGB) - current and as amended. Responsibilities may include but are not limited to the following:
o Major and minor repairs of all building systems from foundation to roof; interior and exterior. o Maintenance and repair of special systems such as emergency lighting, fire alarm and security systems. o Maintenance and repair of mechanical systems such as heating, ventilation and air-conditioning (HVAC), plumbing, sprinkler, and emergency generators. o Coordinating assignments, needs, planning, etc. with supporting facility managers in order to ensure proper operation and maintenance of assigned buildings. o Ensuring the safe and efficient functioning of all facilities. o Will assist building managers in the planning, scheduling and budgeting of work that needs to be completed for effective utilization of staff, materials and equipment. o Conduct inspections of the various facilities to determine maintenance needs and recommend priorities for repair based on the nature of the maintenance problem. o May draft proposals, plans and drawings in preparation for and assistance with projects. o May assist in budgeting, purchasing and other administrative tasks associated with financial transactions to accomplish projects timely. o As required, will supervise subordinate staff on projects and in daily assignments. o Will be required to train and provide mentoring/coaching to staff in order to ensure proper operations, techniques and processes are utilized in completing tasks; ensuring a safe work environment at all times. o May assist in the preparation of and provide input for the annual performance evaluations of subordinate employees. o Performs general grounds maintenance tasks such as clearing sites, mowing lawns, cutting bush and wood, trimming and removing trees and shrubs, maintaining roads and sidewalks, snow and ice removal, collection/pick-up of trash and other obstructions from the building and surrounding areas. o Will be required to work on computers using Microsoft Office products (Word, Excel, Outlook, etc) as well as various databases associated to New York State and facilities operations; such as the Statewide Financial System (SFS). o May occasionally fill in for Supervisor in their absence. o Periodic travel may be required to other facilities; to attend training; or other requirements related to duties as needed. o Periodic overtime will be required - especially during winter months. o Other job related duties as assigned. JOB REQUIREMENTS:
o Working knowledge of skilled and semi-skilled trades. o Working knowledge of HVAC systems. o Working knowledge of applicable Federal, State and local facility and building codes, health and safety standards and other applicable rules and regulations. o Working knowledge of the methods, materials, tools and equipment used in the mechanical, electrical and/or building trades. o Working knowledge of the principles of supervision. o Working knowledge of safety standards and procedures. o Ability to plan and schedule work, including determining staff, equipment, and supplies needed. o Ability to read and interpret plans, diagrams, architectural blueprints and specifications. o Ability to work independently or with other individuals in a project/team setting in accordance with supervisory guidance and direction. o Ability to get along with and interact well with different groups of people, including co-workers, management, both Federal and State personnel and the public utilizing the facility. o Ability to make standard arithmetic computations to calculate the dimensions of the project or building under construction, identify the proper placement of important structural components of the project or building, and calculate the quantity of materials and labor required to complete the project or building. o Ability to work comfortably at heights such as climbing ladders, working on scaffolds, platforms and lifts. o Ability to push, pull, lift and carry heavy objects and equipment (50
lbs). o Ability to work in confined spaces in accordance with requirements. o Ability to work outside in various temperatures and inclement weather for extended periods of time. o Incumbents of this position are considered essential personnel. o Ability to understand and carry out verbal and written instructions. o Must have basic computer skills and knowledge in the use of Microsoft programs. Prefer additional experience with facilities or other database systems. o Ability to train and supervise others. o Ability to read and write in English. o Demonstrate reliability and trustworthiness. o Good verbal and written communication skills. Written materials must be clear and concise.
Job Function
This position is not in the Classified Service of New York State, but is covered under New York State Military Law. If selected, current Civil Service employees will lose their seniority within the Classified Service, thereby exempting them from applying for promotional exams within Civil Service. The Regional General Mechanic (Regional GM) is assigned to a district or geographic region and covers various facilities within the assigned area. The Regional GM is expected to have advanced knowledge and skills in a wide array of facilities operations and building and mechanical trades. Building trades include such specialties as carpentry, roofing, and locksmith skills; while the mechanical trades include such specialties as the maintenance and repair of plumbing, electrical, heating, ventilation, air conditioning and refrigeration systems. The Regional GM functions as the lead general mechanic for the region for which assigned and must have the ability to perform tasks with minimal supervision. Incumbents of this position are considered essential personnel. The incumbent is responsible for keeping the buildings and grounds functional and ready for use at all times. The tasks of the position are those concerned with the maintenance of various components of the buildings themselves. These encompass a broad range of duties to meet the standards of daily, weekly, monthly and yearly inspections. The incumbent will be required to respond to emergencies that may occur at any time of the day. The position performs responsibilities in accordance with DMNA and labor agreement policies and procedures, and where applicable, requirements and standards of the National Guard Bureau (NGB) - current and as amended. Responsibilities may include but are not limited to the following:
o Major and minor repairs of all building systems from foundation to roof; interior and exterior. o Maintenance and repair of special systems such as emergency lighting, fire alarm and security systems. o Maintenance and repair of mechanical systems such as heating, ventilation and air-conditioning (HVAC), plumbing, sprinkler, and emergency generators. o Coordinating assignments, needs, planning, etc. with supporting facility managers in order to ensure proper operation and maintenance of assigned buildings. o Ensuring the safe and efficient functioning of all facilities. o Will assist building managers in the planning, scheduling and budgeting of work that needs to be completed for effective utilization of staff, materials and equipment. o Conduct inspections of the various facilities to determine maintenance needs and recommend priorities for repair based on the nature of the maintenance problem. o May draft proposals, plans and drawings in preparation for and assistance with projects. o May assist in budgeting, purchasing and other administrative tasks associated with financial transactions to accomplish projects timely. o As required, will supervise subordinate staff on projects and in daily assignments. o Will be required to train and provide mentoring/coaching to staff in order to ensure proper operations, techniques and processes are utilized in completing tasks; ensuring a safe work environment at all times. o May assist in the preparation of and provide input for the annual performance evaluations of subordinate employees. o Performs general grounds maintenance tasks such as clearing sites, mowing lawns, cutting bush and wood, trimming and removing trees and shrubs, maintaining roads and sidewalks, snow and ice removal, collection/pick-up of trash and other obstructions from the building and surrounding areas. o Will be required to work on computers using Microsoft Office products (Word, Excel, Outlook, etc) as well as various databases associated to New York State and facilities operations; such as the Statewide Financial System (SFS). o May occasionally fill in for Supervisor in their absence. o Periodic travel may be required to other facilities; to attend training; or other requirements related to duties as needed. o Periodic overtime will be required - especially during winter months. o Other job related duties as assigned. JOB REQUIREMENTS:
o Working knowledge of skilled and semi-skilled trades. o Working knowledge of HVAC systems. o Working knowledge of applicable Federal, State and local facility and building codes, health and safety standards and other applicable rules and regulations. o Working knowledge of the methods, materials, tools and equipment used in the mechanical, electrical and/or building trades. o Working knowledge of the principles of supervision. o Working knowledge of safety standards and procedures. o Ability to plan and schedule work, including determining staff, equipment, and supplies needed. o Ability to read and interpret plans, diagrams, architectural blueprints and specifications. o Ability to work independently or with other individuals in a project/team setting in accordance with supervisory guidance and direction. o Ability to get along with and interact well with different groups of people, including co-workers, management, both Federal and State personnel and the public utilizing the facility. o Ability to make standard arithmetic computations to calculate the dimensions of the project or building under construction, identify the proper placement of important structural components of the project or building, and calculate the quantity of materials and labor required to complete the project or building. o Ability to work comfortably at heights such as climbing ladders, working on scaffolds, platforms and lifts. o Ability to push, pull, lift and carry heavy objects and equipment (50
lbs). o Ability to work in confined spaces in accordance with requirements. o Ability to work outside in various temperatures and inclement weather for extended periods of time. o Incumbents of this position are considered essential personnel. o Ability to understand and carry out verbal and written instructions. o Must have basic computer skills and knowledge in the use of Microsoft programs. Prefer additional experience with facilities or other database systems. o Ability to train and supervise others. o Ability to read and write in English. o Demonstrate reliability and trustworthiness. o Good verbal and written communication skills. Written materials must be clear and concise.
Salary Range:
From $51711 to $51711 Annually
Minimum Qualification
This position is not in the Classified Service of New York State, but is covered under New York State Military Law. If selected, current Civil Service employees will lose their seniority within the Classified Service, thereby exempting them from applying for promotional exams within Civil Service. Must have at least three (3) years of permanent New York State service in a maintenance, engineering or similar title series allocated to a salary grade (SG)-9 or above with experience performing duties in the mechanical or building trades; OR Five (5) years of full-time experience in maintenance work performing building and/or mechanical trades work, complex engineering tasks or similar duties where at least two (2) years included direct supervision of subordinate staff. NOTE:
Completion of an appropriate two-year technical school may be substituted for one year of experience. Other combinations of education and work experience, including military, may be considered, however, candidate must demonstrate direct relevance to the job duties noted above. AND Within nine (9) months of the date of appointment must obtain a New York State Department of Health (NYSDOH) Approved Backflow Tester - Certification. Within nine (9) months of the date of appointment must obtain a New York State Code Enforcement Official - Certification. Must be at least 18 years of age and have a high school diploma or GED. Must be able to read and write in English. Must be able to work comfortably at heights such as climbing ladders, working on scaffolds, platforms and lifts. Must be able to push, pull, lift and carry heavy objects and equipment (50
lbs). Must be able to work in confined spaces in accordance with requirements and training. Must be able to work outside in various temperatures and inclement weather for extended periods of time. Must be able to operate and maintain tools, machinery and equipment required for craft to which assigned. Must be familiar with and be able to independently use commonly utilized software programs such as Microsoft Word and Excel. Required to have or successfully complete within 90 days of receiving computer access, all training associated with assigned data systems such as SFS, GFEBS and the Statewide Learning Management System (SLMS) and/or other computer training as related to duty assignments. Should related regulations, procedures and requirements change, additional training and/or certifications may be required. Must possess a valid driver's license to operate a motor vehicle in the State of New York. Must report any changes to supervisory chain and State Human Resources (MNHS). May also be required to acquire and maintain a military driver's license to operate military vehicles and equipment in accordance with NGB standards to include medical evaluation requirements - current and as amended. In accordance with NGB standards, will be required to obtain and maintain a favorable background investigation, and have an appropriate clearance to allow access to computer networks and restricted areas to determine suitability, loyalty, and trustworthiness. Minimally a National Agency Check with Inquiry (NACI) will be completed - dependent on current regulation, a SECRET clearance may be required - especially at Air Bases when flight line access requires SECRET. At all times, the employee MUST maintain minimum standards in accordance with current, and as amended, agency, statutory and NGB requirements and directives; failure to do so will subject the individual to disciplinary action, including possible termination. NOTE:
Position standards illustrate the nature, extent and scope of duties and responsibilities of the position described. Standards cannot and do not include all of the work that might be appropriately performed by the incumbent. The minimum qualifications above are those which were required for appointment at the time the Position Standards were written. Please contact State Human Resources Management for any further information regarding the position requirements.Estimated Salary: $20 to $28 per hour based on qualifications.
o Major and minor repairs of all building systems from foundation to roof; interior and exterior. o Maintenance and repair of special systems such as emergency lighting, fire alarm and security systems. o Maintenance and repair of mechanical systems such as heating, ventilation and air-conditioning (HVAC), plumbing, sprinkler, and emergency generators. o Coordinating assignments, needs, planning, etc. with supporting facility managers in order to ensure proper operation and maintenance of assigned buildings. o Ensuring the safe and efficient functioning of all facilities. o Will assist building managers in the planning, scheduling and budgeting of work that needs to be completed for effective utilization of staff, materials and equipment. o Conduct inspections of the various facilities to determine maintenance needs and recommend priorities for repair based on the nature of the maintenance problem. o May draft proposals, plans and drawings in preparation for and assistance with projects. o May assist in budgeting, purchasing and other administrative tasks associated with financial transactions to accomplish projects timely. o As required, will supervise subordinate staff on projects and in daily assignments. o Will be required to train and provide mentoring/coaching to staff in order to ensure proper operations, techniques and processes are utilized in completing tasks; ensuring a safe work environment at all times. o May assist in the preparation of and provide input for the annual performance evaluations of subordinate employees. o Performs general grounds maintenance tasks such as clearing sites, mowing lawns, cutting bush and wood, trimming and removing trees and shrubs, maintaining roads and sidewalks, snow and ice removal, collection/pick-up of trash and other obstructions from the building and surrounding areas. o Will be required to work on computers using Microsoft Office products (Word, Excel, Outlook, etc) as well as various databases associated to New York State and facilities operations; such as the Statewide Financial System (SFS). o May occasionally fill in for Supervisor in their absence. o Periodic travel may be required to other facilities; to attend training; or other requirements related to duties as needed. o Periodic overtime will be required - especially during winter months. o Other job related duties as assigned. JOB REQUIREMENTS:
o Working knowledge of skilled and semi-skilled trades. o Working knowledge of HVAC systems. o Working knowledge of applicable Federal, State and local facility and building codes, health and safety standards and other applicable rules and regulations. o Working knowledge of the methods, materials, tools and equipment used in the mechanical, electrical and/or building trades. o Working knowledge of the principles of supervision. o Working knowledge of safety standards and procedures. o Ability to plan and schedule work, including determining staff, equipment, and supplies needed. o Ability to read and interpret plans, diagrams, architectural blueprints and specifications. o Ability to work independently or with other individuals in a project/team setting in accordance with supervisory guidance and direction. o Ability to get along with and interact well with different groups of people, including co-workers, management, both Federal and State personnel and the public utilizing the facility. o Ability to make standard arithmetic computations to calculate the dimensions of the project or building under construction, identify the proper placement of important structural components of the project or building, and calculate the quantity of materials and labor required to complete the project or building. o Ability to work comfortably at heights such as climbing ladders, working on scaffolds, platforms and lifts. o Ability to push, pull, lift and carry heavy objects and equipment (50
lbs). o Ability to work in confined spaces in accordance with requirements. o Ability to work outside in various temperatures and inclement weather for extended periods of time. o Incumbents of this position are considered essential personnel. o Ability to understand and carry out verbal and written instructions. o Must have basic computer skills and knowledge in the use of Microsoft programs. Prefer additional experience with facilities or other database systems. o Ability to train and supervise others. o Ability to read and write in English. o Demonstrate reliability and trustworthiness. o Good verbal and written communication skills. Written materials must be clear and concise.
Job Function
This position is not in the Classified Service of New York State, but is covered under New York State Military Law. If selected, current Civil Service employees will lose their seniority within the Classified Service, thereby exempting them from applying for promotional exams within Civil Service. The Regional General Mechanic (Regional GM) is assigned to a district or geographic region and covers various facilities within the assigned area. The Regional GM is expected to have advanced knowledge and skills in a wide array of facilities operations and building and mechanical trades. Building trades include such specialties as carpentry, roofing, and locksmith skills; while the mechanical trades include such specialties as the maintenance and repair of plumbing, electrical, heating, ventilation, air conditioning and refrigeration systems. The Regional GM functions as the lead general mechanic for the region for which assigned and must have the ability to perform tasks with minimal supervision. Incumbents of this position are considered essential personnel. The incumbent is responsible for keeping the buildings and grounds functional and ready for use at all times. The tasks of the position are those concerned with the maintenance of various components of the buildings themselves. These encompass a broad range of duties to meet the standards of daily, weekly, monthly and yearly inspections. The incumbent will be required to respond to emergencies that may occur at any time of the day. The position performs responsibilities in accordance with DMNA and labor agreement policies and procedures, and where applicable, requirements and standards of the National Guard Bureau (NGB) - current and as amended. Responsibilities may include but are not limited to the following:
o Major and minor repairs of all building systems from foundation to roof; interior and exterior. o Maintenance and repair of special systems such as emergency lighting, fire alarm and security systems. o Maintenance and repair of mechanical systems such as heating, ventilation and air-conditioning (HVAC), plumbing, sprinkler, and emergency generators. o Coordinating assignments, needs, planning, etc. with supporting facility managers in order to ensure proper operation and maintenance of assigned buildings. o Ensuring the safe and efficient functioning of all facilities. o Will assist building managers in the planning, scheduling and budgeting of work that needs to be completed for effective utilization of staff, materials and equipment. o Conduct inspections of the various facilities to determine maintenance needs and recommend priorities for repair based on the nature of the maintenance problem. o May draft proposals, plans and drawings in preparation for and assistance with projects. o May assist in budgeting, purchasing and other administrative tasks associated with financial transactions to accomplish projects timely. o As required, will supervise subordinate staff on projects and in daily assignments. o Will be required to train and provide mentoring/coaching to staff in order to ensure proper operations, techniques and processes are utilized in completing tasks; ensuring a safe work environment at all times. o May assist in the preparation of and provide input for the annual performance evaluations of subordinate employees. o Performs general grounds maintenance tasks such as clearing sites, mowing lawns, cutting bush and wood, trimming and removing trees and shrubs, maintaining roads and sidewalks, snow and ice removal, collection/pick-up of trash and other obstructions from the building and surrounding areas. o Will be required to work on computers using Microsoft Office products (Word, Excel, Outlook, etc) as well as various databases associated to New York State and facilities operations; such as the Statewide Financial System (SFS). o May occasionally fill in for Supervisor in their absence. o Periodic travel may be required to other facilities; to attend training; or other requirements related to duties as needed. o Periodic overtime will be required - especially during winter months. o Other job related duties as assigned. JOB REQUIREMENTS:
o Working knowledge of skilled and semi-skilled trades. o Working knowledge of HVAC systems. o Working knowledge of applicable Federal, State and local facility and building codes, health and safety standards and other applicable rules and regulations. o Working knowledge of the methods, materials, tools and equipment used in the mechanical, electrical and/or building trades. o Working knowledge of the principles of supervision. o Working knowledge of safety standards and procedures. o Ability to plan and schedule work, including determining staff, equipment, and supplies needed. o Ability to read and interpret plans, diagrams, architectural blueprints and specifications. o Ability to work independently or with other individuals in a project/team setting in accordance with supervisory guidance and direction. o Ability to get along with and interact well with different groups of people, including co-workers, management, both Federal and State personnel and the public utilizing the facility. o Ability to make standard arithmetic computations to calculate the dimensions of the project or building under construction, identify the proper placement of important structural components of the project or building, and calculate the quantity of materials and labor required to complete the project or building. o Ability to work comfortably at heights such as climbing ladders, working on scaffolds, platforms and lifts. o Ability to push, pull, lift and carry heavy objects and equipment (50
lbs). o Ability to work in confined spaces in accordance with requirements. o Ability to work outside in various temperatures and inclement weather for extended periods of time. o Incumbents of this position are considered essential personnel. o Ability to understand and carry out verbal and written instructions. o Must have basic computer skills and knowledge in the use of Microsoft programs. Prefer additional experience with facilities or other database systems. o Ability to train and supervise others. o Ability to read and write in English. o Demonstrate reliability and trustworthiness. o Good verbal and written communication skills. Written materials must be clear and concise.
Salary Range:
From $51711 to $51711 Annually
Minimum Qualification
This position is not in the Classified Service of New York State, but is covered under New York State Military Law. If selected, current Civil Service employees will lose their seniority within the Classified Service, thereby exempting them from applying for promotional exams within Civil Service. Must have at least three (3) years of permanent New York State service in a maintenance, engineering or similar title series allocated to a salary grade (SG)-9 or above with experience performing duties in the mechanical or building trades; OR Five (5) years of full-time experience in maintenance work performing building and/or mechanical trades work, complex engineering tasks or similar duties where at least two (2) years included direct supervision of subordinate staff. NOTE:
Completion of an appropriate two-year technical school may be substituted for one year of experience. Other combinations of education and work experience, including military, may be considered, however, candidate must demonstrate direct relevance to the job duties noted above. AND Within nine (9) months of the date of appointment must obtain a New York State Department of Health (NYSDOH) Approved Backflow Tester - Certification. Within nine (9) months of the date of appointment must obtain a New York State Code Enforcement Official - Certification. Must be at least 18 years of age and have a high school diploma or GED. Must be able to read and write in English. Must be able to work comfortably at heights such as climbing ladders, working on scaffolds, platforms and lifts. Must be able to push, pull, lift and carry heavy objects and equipment (50
lbs). Must be able to work in confined spaces in accordance with requirements and training. Must be able to work outside in various temperatures and inclement weather for extended periods of time. Must be able to operate and maintain tools, machinery and equipment required for craft to which assigned. Must be familiar with and be able to independently use commonly utilized software programs such as Microsoft Word and Excel. Required to have or successfully complete within 90 days of receiving computer access, all training associated with assigned data systems such as SFS, GFEBS and the Statewide Learning Management System (SLMS) and/or other computer training as related to duty assignments. Should related regulations, procedures and requirements change, additional training and/or certifications may be required. Must possess a valid driver's license to operate a motor vehicle in the State of New York. Must report any changes to supervisory chain and State Human Resources (MNHS). May also be required to acquire and maintain a military driver's license to operate military vehicles and equipment in accordance with NGB standards to include medical evaluation requirements - current and as amended. In accordance with NGB standards, will be required to obtain and maintain a favorable background investigation, and have an appropriate clearance to allow access to computer networks and restricted areas to determine suitability, loyalty, and trustworthiness. Minimally a National Agency Check with Inquiry (NACI) will be completed - dependent on current regulation, a SECRET clearance may be required - especially at Air Bases when flight line access requires SECRET. At all times, the employee MUST maintain minimum standards in accordance with current, and as amended, agency, statutory and NGB requirements and directives; failure to do so will subject the individual to disciplinary action, including possible termination. NOTE:
Position standards illustrate the nature, extent and scope of duties and responsibilities of the position described. Standards cannot and do not include all of the work that might be appropriately performed by the incumbent. The minimum qualifications above are those which were required for appointment at the time the Position Standards were written. Please contact State Human Resources Management for any further information regarding the position requirements.Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
